Weld Neck Flange
Weld Neck Flange
Weld Neck Flange is a flange that transfers pressure or stress to the flange, which goes to the tube through the strong neck area. There is no need to worry about cracks in the weld joints. It can occur with weld and slip-on flanges. This special design makes this type of flange expensive and is often used in applications where high pressure is an important factor.
This type of flange is used for large pipes and assembling or installing use butt weld method. It is possible to check the integrity of the weld by a radiographic method.
This high neck flange is available in both raised face and flat-faced versions. Fu Thai Pipe’s high neck flange is available in various sizes. Manufactured from a wide range of material grades and properties. It also has a robust construction to withstand high or fluctuating temperatures and pressures that meet all your purposes of use.
Ratings of weld neck flanges
American type: CLASS 150, CLASS 300, CLASS 400, CLASS 600, CLASS 900 และ CLASS 1500
European type: PN 6, PN 10, PN 16, PN 25, PN 40, PN 63 และ PN 100
Type of flange surface
Flat Face (FF), Raised face (RF), Tongue (T), Groove (G), Female (F), Male (M), Ring Joint (RJ)
Material of weld neck flange
Carbon Steel: A105
Stainless Steel: A182 304-304H-304L-316-316L
Standard of the weld neck flange
GB/T9112-2000,GB/T9115.1-2000, GB/T9115.2-2000, GB/T9115.3-2000, GB/T9115.4-2000, GB/T9124-2000, GB/T13402-1992
SH/T3406-1996
GD2000 GD87-1101
JB/T74-1994, JB/T75-1994, JB/T82.1-1994, JB/T82.2-1994, JB/T82.3-1994, JB/T82.4-1994
HG/T20592-2009, HG/T20614-2009, HG/T20615-2009, HG/T20623-2009, HG/T20635-2009
ASME B16.5-2009, ASME B16.47-2006
API605-1988
MSS SP 44-2006
CSA Z245.12-05-2005
EN1092-1-2007, EN1759-1-2004
DIN2630, DIN2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638
BS1560-3.1-1989, BS4504-3.1-1989
AFNOR NF E29-200-1-2007
ISO7005-1-1992
AS2129-2000
JIS B2220-2004
Related products
FlangeFlange
Read moreWe mainly used flanges for connections between pipes and equipment such as valves, pumps, tanks, strainers, or other connections that require disassembly.
SK Fitting Valve imports and distributes steel flange and stainless steel quality. Including the production of all kinds of flanges according to the desired designs at a friendly price. All works are standardized and meet the customer’s intended use.
- Flange
SO – Slip On Flange
Read moreSlip-on flanges with an inner diameter larger than the outer diameter of the tube body. This type of flange is connected to the pipe body by using fillet welds at the top and bottom of the flange body. A slip-on flange is like a socket welded flange, with the difference being that the inner hole of the slip-on flange has no shoulder. Therefore, this type of flange connection must be welded both on the outside and on the inside. But we only weld flanges.
- Flange
Blind Flange
Read moreBlind flange is an essential part of the pipeline system because they apply to prevent or make breakpoints. Pipeline maintenance requires this type of steel flange.
SK Fitting Valve provides a broad range of flanged flanges with a wide range of specifications and material grades. We are glad to suggest choosing the proper flange for your application. - Flange
Lap Joint Flange
Read moreLap Joint Flange must be used together with the stub end by attaching the flange to the stub end and connecting the stub end to the pipe by the Butt Weld method. pipe body This can reduce the misalignment of bolt holes and reduce the torque caused by the misalignment of the pipe.
