Weld Neck Flange
Weld Neck Flange
Weld Neck Flange is a flange that transfers pressure or stress to the flange, which goes to the tube through the strong neck area. There is no need to worry about cracks in the weld joints. It can occur with weld and slip-on flanges. This special design makes this type of flange expensive and is often used in applications where high pressure is an important factor.
This type of flange is used for large pipes and assembling or installing use butt weld method. It is possible to check the integrity of the weld by a radiographic method.
This high neck flange is available in both raised face and flat-faced versions. Fu Thai Pipe’s high neck flange is available in various sizes. Manufactured from a wide range of material grades and properties. It also has a robust construction to withstand high or fluctuating temperatures and pressures that meet all your purposes of use.
Ratings of weld neck flanges
American type: CLASS 150, CLASS 300, CLASS 400, CLASS 600, CLASS 900 และ CLASS 1500
European type: PN 6, PN 10, PN 16, PN 25, PN 40, PN 63 และ PN 100
Type of flange surface
Flat Face (FF), Raised face (RF), Tongue (T), Groove (G), Female (F), Male (M), Ring Joint (RJ)
Material of weld neck flange
Carbon Steel: A105
Stainless Steel: A182 304-304H-304L-316-316L
Standard of the weld neck flange
GB/T9112-2000,GB/T9115.1-2000, GB/T9115.2-2000, GB/T9115.3-2000, GB/T9115.4-2000, GB/T9124-2000, GB/T13402-1992
SH/T3406-1996
GD2000 GD87-1101
JB/T74-1994, JB/T75-1994, JB/T82.1-1994, JB/T82.2-1994, JB/T82.3-1994, JB/T82.4-1994
HG/T20592-2009, HG/T20614-2009, HG/T20615-2009, HG/T20623-2009, HG/T20635-2009
ASME B16.5-2009, ASME B16.47-2006
API605-1988
MSS SP 44-2006
CSA Z245.12-05-2005
EN1092-1-2007, EN1759-1-2004
DIN2630, DIN2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638
BS1560-3.1-1989, BS4504-3.1-1989
AFNOR NF E29-200-1-2007
ISO7005-1-1992
AS2129-2000
JIS B2220-2004
Related products
FlangeManufacture flange
Read moreManufacture flange according to the prototype. We produce flanges according to all standard designs.
- Flange
Plate Flange
Read moreSK Fitting Valve offers a broad variety of flat welded flanges with a wide range of features. These flanges are available in a variety of sizes to satisfy the needs of the customer’s application. They can be made from a range of materials.
- Flange
Threaded Flange
Read moreThreaded Flange with a threaded bore is called a threaded flange. It’s designed for low-pressure and low-temperature pipes. Without welding, assembly and installation are simple. This allows it to be installed in regions where fuel is available. Air and water utilities use threaded flanges.
- Flange
Lap Joint Flange
Read moreLap Joint Flange must be used together with the stub end by attaching the flange to the stub end and connecting the stub end to the pipe by the Butt Weld method. pipe body This can reduce the misalignment of bolt holes and reduce the torque caused by the misalignment of the pipe.
