Gate Valve
Gate Valve
Gate Valve imported from Japan, good properties, resistant to high friction. Suitable for on-off work, water blocking.
Material: brass, nickel plated brass, cast iron, stainless steel, ductile cast iron, ductile iron
Pressure: 10K,20K,125P,150P,800P, PN16, PN25 Type: thread, flange, weld
A sluice valve, also known as a gate valve, is a valve that allows a fluid, such as liquid, to flow through a line. It should be switched on or off till the very end. Isolated valves are used in all gate valves.
Related products
- Valve
Foot Valve
Read moreFoot valve Thai people often call the skull valve. It is the bottom valve used to suck water from below the pump. By supplying water to the pump, there must be a casting or mule. When the water goes into the pump, it also flows into the pipe. This valve prevents water from flowing into the well. The water in the pipe and at the pump will draw up the water in the well when the pump is powered on. One side of this type of valve has a thread.
- Valve
Solenoid Valve
Read moreSolenoid Valve is a valve used to control the direction of air (or fluid) by energizing an electrical coil, together with a spring return or a second coil when the valve must move to/hold another position. When current flows through the coil, the magnetic field pulls the plunger/armature to shift the valve; when power is removed, a spring (typical for single-solenoid designs) returns the valve to its normal position.
- Valve
Steam Trap
Read moreSTEAM TRAP Although steam trap is a small device, and the price is not high, it is very necessary and must be selected accordingly. Otherwise, it may cause enormous damage and loss to the factory without the management’s knowledge. The main function of the steam trap is to drain the condensate and the air or gas-generated or contained in the steam system to be discharged without the loss of steam from the system.
