Steam Trap
Steam Trap
STEAM TRAP Although steam trap is a small device, and the price is not high, it is very necessary and must be selected accordingly. Otherwise, it may cause enormous damage and loss to the factory without the management’s knowledge. The main function of the steam trap is to drain the condensate and the air or gas-generated or contained in the steam system to be discharged without the loss of steam from the system.
A steam trap can be divided into 3 main types according to the principle of operation:
1. THERMODYNAMIC STEAM TRAP
2. THERMOSTATIC STEAM TRAP
3. MECHANIC STEAM TRAP
Related products
ValveButterfly Valve
Read moreButterfly valve is a valve in the valve family known as a quarter-turn valve (a valve that rotates a quarter of a circle). The “butterfly” is a valve with a circular metal plate connected to the valve stem. When the valve is closed, it switches to a position that entirely stops the flow of fluid.
- Valve
Pressure Reducing Valve
Read morePressure Reducing Valve
Pressure Reducing Valve is a valve used to reduce the output pressure in both conditions: flowing and no water flow. - Valve
Angle Valve
Read moreAngle Valve The building type fire extinguisher angle valve has a British standard water shut-off door.
- Valve
Safety Valve
Read moreSafety Valve also known as “Safety valve” or “Safety”, is a safety device of the system. Its main function is to release the pressure inside the system. The valve will automatically operate when the pressure exceeds the set value. This type of valve is used for compressible fluids such as steam or gases that require rapid pressure relief.
